Power Amplifier

SPECIFICATIONS
Maximum power (RMS) 600 W RMS
Low impedance / Ω 8 Ω
Quality Hi-Fi Subwoofer
Sensitivity (1W, 1m) dB (SPL) 96 dB
Frequency response (a -6dB) 33 Hz – 160 Hz
Dimensions (X x Y x Z) 624 x 540 x 650 mm

SPECIFICATIONS
2 x 250 W; 1 x 500 W Power amplifier.
Oversized stereo power module.
Variable speed cooling fan.
Safeguarded against output short-circuit.
SPEAKON® speaker output.
Balanced inputs XLR connectors.
Low distortion and high signal-to-noise ratio.
Input sensitivity switchable between 0.775 V and 1.44 V.
Stereo, parallel or mono operation modes.
Anti-clip limiter included.
2 19″ rack unit (2U).
Finish: black.

SPECIFICATIONS
2 x 750 W; 1 x 1500 W (100V line) Power amplifier.
Balanced inputs XLR connectors.
Low distortion and high signal-to-noise ratio.
Input sensitivity switchable between 0.775 V and 1.44 V.
Stereo, parallel or mono operation modes.
Binding post and SPEAKON® speaker outputs.
Anti-clip limiter included.
2 19″” rack units (2U).
Finish: black.

Features
THERMAL PROTECTION & AUTOMATIC IDLING CIRUITRY
Thermal protection circuitry is provided for stability and reliability against over-current and over-heating.
Automatic idling circuit is also provided to protect against thermal run-away.
▪ MUTE START SYSTEM
To protect speakers and remove pop noise, start operating after 1 second.
▪ BALANCED INPUT
To allow you to build reliable system, a balanced input is provided to reduce hum pick up from a long distance input cable
and to avoid group-loop problems.
▪ USE OF EMERGENCY BATTERY
You can operate the power amplifier by using emergency battery for unexpected AC power failure.
Specifications

Features
▪ THERMAL PROTECTION & AUTOMATIC IDLING CIRUITRY
Thermal protection circuitry is provided for stability and reliability against over-current and over-heating.
Automatic idling circuit is also provided to protect against thermal run-away.
▪ MUTE START SYSTEM
To protect speakers and remove pop noise, start operating after 1 second.
▪ BALANCED INPUT
To allow you to build reliable system, a balanced input is provided to reduce hum pick up from a long distance input cable
and to avoid group-loop problems.
▪ USE OF EMERGENCY BATTERY
You can operate the power amplifier by using emergency battery for unexpected AC power failure.
SPECIFICATIONS

Features
▪ HIGH PERFORMANCE CIRCUIT
The Pre-amplifier includes the high performance circuit and performs better than 90dB of S/N ratio and less than 0.3% of T.H.D.
▪ BALANCED CIRCUIT
The Mic1~2 input, Line1~2 input and Pre output circuits are designed with balanced circuit to prevent noise from outside.
▪ PRIORITY SIGNAL SUPPORT FUNCTION
Automatically reduce or recover volume of other input signals when coming signal from an emergency.
All or announcement by Mic1,2 and chime.
▪ Protection Circuits
Overload, Overheat, Soft-Start Automatic-Start Air Forced Cooling FAN.
SPECIFICATIONS